1. Shingle MouldingShingle moulding is a narrow piece of trim attached just below the roof edge to support and protect the ends of overhanging shingles from damage.

TrimCraft’s natural durability is especially valuable in this application.

2. RakeRake board is decorative trim applied to the side of exposed rafters on gable roofs normally at an angle to the ground.

Harder to reach than most trim components, TrimCraft trim’s factory priming makes painting easier for a more uniform coat, greater durability and less maintenance.

3. Fascia BoardFascia board is decorative trim which is attached to the exposed ends of roof rafters and is parallel to the ground.

One of the most common and visible trim components, TrimCraft trim’s 16-foot standard length reduces the number of joints in long stretches of fascia for a smoother appearance.

4. Band BoardBand board, also known as frieze board, is the decorative trim used to cover the joint between a home’s exterior walls and TrimCraft soffit.

In addition, band board can be used to cover the horizontal seam between two different types of exterior wall materials, i.e. brick and siding.

Since each piece of TrimCraft trim offers two surfaces – one side is smooth, the other is textured – it complements a wide variety of architectural styles from brick and stucco to siding.

5. Corner TrimCorner trim covers the exposed ends of siding (by butting or overlapping) where perpendicular sides of veneer construction join.

Naturally moisture resistant and dimensionally stable, TrimCraft trim helps maintain tight construction longer.

6. Window and Door TrimWindow and door trim create decorative frames designed to accent these architectural components while covering the joint between door and window jambs and exterior walls.

Guaranteed defect free, TrimCraft’s flawless surface increases the perception of quality craftsmanship, especially in high-visibility areas.

7. SoffitSoffit board seals the underside of exposed roof rafters. It butts the fascia or rake board at a 90º angle.

TrimCraft soffit, available in five precut widths, or TrimCraft ceiling panels, ripped to custom dimensions, make installation fast and easy with standard tools and techniques. Available plowed, TrimCraft trim is also designed to make soffit installation easier.

8. Ceiling PanelsCeiling panels cover the underside of room joists on patios, entryways and wide overhangs.

Full-size TrimCraft ceiling panels cover large areas quickly with a premium engineered wood solution.

9. ColumnsPorch columns and a variety of other decorative design accents provide added interest to a home.

TrimCraft’s variety of dimensions and workability are ideal for many of these uses.