Temple-Inland


Click here to log in to Update

Search Building Products by Brand Name:

Purple Studs Promo
GreenGlass Mold- and Water-Resistant Fiberglass Structural Gypsum Sheathing

GreenGlass®

Fiberglass-Faced Gypsum Sheathing

GreenGlass fiberglass-faced gypsum sheathing is Temple-Inland’s most moisture- and mold-resistant sheathing product. Developed for commercial and residential application under a broad range of exterior veneers, GreenGlass also adds structural strength, fire resistance and a warranty for up to 12 months of exposure in normal weather conditions.

Warranty:

Features:

  • Manufactured with the TemShield Mold Protection System engineered into the gypsum core sandwiched between naturally mold-resistant fiberglass facers
  • Available in 1⁄2" thickness with regular water- and mold-resistant core and 5⁄8" thickness with a fire-resistant, water- and mold-resistant core
  • SCS certified in accordance with ISO 14021 and SCS V4-1 recycled content standards to contain at least 90% pre-consumer recycled gypsum content on a dry-weight basis
  • Superior racking resistance conforms to ASTM E72 standard for code-recognized structural sheathing
  • May be installed over wood or metal framing
  • Fire resistance classified by Underwriters Laboratories in accordance with ASTM E1192

Product Specifications

Product ASTM Installation Standards
GreenGlass 1/2" thickness (12.7 mm) C1177, C1396 ASTM C1280, ASTM C840, GA253, GA216
GreenGlass 5/8" thickness (15.9 mm) C1177, C1396 ASTM C1280, ASTM C840, GA253, GA216
  1/2" (12.7 mm)
 5/8"* (15.9 mm)
*5/8" complies with UL designs and requirements for Type X products
1ASTM C473; 2ASTM E96; 3ASTM E84; 4ASTM E331; 5GA-216 and GA-2265
Width 4' (1219 mm) 4' (1219 mm)
Lengths 8' (2438 mm)
9' (2743 mm)
10' (3048 mm)
12' (3658 mm)
8' (2438 mm)
9' (2743 mm)
10' (3048 mm)
12' (3658 mm)
Edge Square Square
Weight 1.95 pounds per square foot 2.40 pounds per square foot
Water absorption1 < 10% Max < 10% Max
Permeability2 (Perms) > 27 > 22
Flame Spread3 0 0
Smoke Developed3 0 0
Flexural Strength1 80/100 100/140
Combustibility Non Non
Weather-Resistive Barrier4 Pass Pass
Bending Radii5 10' 15'

Special Order Information:

Other widths, edges and lengths may be available on special order with established minimums and lead time. Some products may not be available in all markets. Please check with your local Temple-Inland sales representative.

    Limitations

  • Should not be used as a nailing base or in lieu of structural wood panel when required
  • Should not be immersed in water or subjected to cascaded water conditions
  • Should not be applied below grade or laminated to masonry surfaces

Mold and Moisture Resistance

GreenGlass is produced with the TemShield Mold Protection System engineered into its gypsum core and is faced on both sides with naturally mold-resistant fiberglass mats. It scored a 10, the highest value possible, when tested in accordance with ASTM D3273, the standard test for mold resistance. Its water absorption of less than 10 percent was tested in accordance with ASTM C473.

Fire Resistance of 5/8" Type X Panels

GreenGlass fire-resistant gypsum sheathing has been tested in accordance with ASTM E119 and therefore may provide a fire-resistance rating of one or more hours, depending upon the assembly in which it is applied.

Storage:

Gypsum board should be carried, never dragged, to prevent damaging the finished edges. When storing gypsum boards, store them indoors and protect them from weather and direct sunlight. Boards should be stored lying flat and neatly stacked. Care should be taken to prevent sagging or damage to edges, ends and surfaces. Placing boards against framing is not recommended.